Gems AEM 15
Moderators:R!C0, JonMan, RickS
Hi,
can anyone tell me if there still is a sw that can map a GEMS AEM15 36X2, s/n 31172 MOD Iss.B
Any information like pinout would be much appreciated.
Regards
Mikael
can anyone tell me if there still is a sw that can map a GEMS AEM15 36X2, s/n 31172 MOD Iss.B
Any information like pinout would be much appreciated.
Regards
Mikael
Re: Gems AEM 15
Hi Mikael,
You should be able to our standard GWv4 software.
If it still has the same firmware it had when is was here you will also need the attached GIN file to connect to it.
Regards
You should be able to our standard GWv4 software.
If it still has the same firmware it had when is was here you will also need the attached GIN file to connect to it.
Regards
- Attachments
-
- AEM15GENV120.GIN
- (262KiB)Downloaded 1003 times
Re: Gems AEM 15
Many thanks for the reply.
Is there any pin out drawing or manual still available?
Kind Regards
Mikael
Is there any pin out drawing or manual still available?
Kind Regards
Mikael
Re: Gems AEM 15
Hi Mikael,
I have come across this document in our archive, that will give you some pinout and jumper information.
I will dig a little deeper and also drop AEM a line to see if they have any further info that maybe of assistance.
Best regards,
Rick
I have come across this document in our archive, that will give you some pinout and jumper information.
I will dig a little deeper and also drop AEM a line to see if they have any further info that maybe of assistance.
Best regards,
Rick
- Attachments
-
- GEMS AEM15 36x2 adaptor ca.doc
- GEMS/AEM15 2x36 Pin Connector Adaptor
- (114.5KiB)Downloaded 1037 times
Re: Gems AEM 15
Thanks,
Just what I needed.
Regrds
Mikael
Just what I needed.
Regrds
Mikael
Re: Gems AEM 15
Your welcome.
If I can trace any more info, I'll post it here.
BR, Rick
If I can trace any more info, I'll post it here.
BR, Rick