Lambda Table Grid and Calibration of Bosch LSU

Post here if you require technical information regarding a GEMS product

Moderators:R!C0, JonMan, RickS

Post Reply
MASAMICHI TAKIZAWA
New User
Posts:5
Joined:Sun Sep 20, 2009 1:37 pm
Lambda Table Grid and Calibration of Bosch LSU

Post by MASAMICHI TAKIZAWA » Wed Sep 23, 2009 1:47 am

Hi,

I'm going to use Bosch LSU for EVOX.

Thanks to evosoh, I understand wiring, but I have no Lambda Table Grid for Bosch LSU,
and I don't know how to Calibrate the sensor.

How I get the Lambda Table Grid and calibration method?

Please teach me.

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: Lambda Table Grid and Calibration of Bosch LSU

Post by RickS » Thu Sep 24, 2009 11:23 am

Hi There,

Yes that was a good explanation by evosoh.

The Bosch LSU was used for the Base calibrations we made. You can download the base calibration here: http://www.gems.co.uk/?content=pages&id ... and-setups
and copy and paste the Lambda 1 table into your calibration. It is always worth correcting this table for each sensor if you get the chance to plug an external gauge and sensor in.

Hope this helps
Ed

MASAMICHI TAKIZAWA
New User
Posts:5
Joined:Sun Sep 20, 2009 1:37 pm

Re: Lambda Table Grid and Calibration of Bosch LSU

Post by MASAMICHI TAKIZAWA » Thu Sep 24, 2009 5:05 pm

Thank you EdH.

I understand.

Post Reply