injector angle subaru96 ecu

Post here if you have an issue with a GEMS Product

Moderators:R!C0, JonMan, RickS

Post Reply
2ltrrabbit
User
Posts:19
Joined:Tue Dec 25, 2012 2:14 pm
injector angle subaru96 ecu

Post by 2ltrrabbit » Sat Jan 19, 2013 6:11 pm

hi,
is it possible to alter the injector angle on this ecu?

2ltrrabbit
User
Posts:19
Joined:Tue Dec 25, 2012 2:14 pm

Re: injector angle subaru96 ecu

Post by 2ltrrabbit » Sat Jan 19, 2013 7:40 pm

would i be right in saying its the fuel sync?

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: injector angle subaru96 ecu

Post by RickS » Mon Jan 21, 2013 9:49 am

If you are running v2.28, then your are correct. Fuel Sync Is the fuel synchronisation control and determines the injector firing relative to a synchronising point in the 720° engine cycle range 0 to 7. Note old calibrations before G1.15 should have this value doubled.
HTH
RickS

2ltrrabbit
User
Posts:19
Joined:Tue Dec 25, 2012 2:14 pm

Re: injector angle subaru96 ecu

Post by 2ltrrabbit » Wed Jan 23, 2013 10:46 pm

ok thanks,
also does this ecu support launch control?

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: injector angle subaru96 ecu

Post by RickS » Thu Jan 24, 2013 9:42 am

Unfortunately, no it doesn't. The only torque reduction available in this ECU is ALS.

Post Reply