DA37 - MOTEC M800

pagh106 · Post by **pagh106** » Sat Oct 06, 2012 2:27 am

Hello,

I need a base map or configurations for DA37 with Motec M800 connect can.

Thanks and Best Regards

RickS · Post by **RickS** » Mon Oct 08, 2012 8:36 am

Good morning,
That is something that we don't have directly. What I can offer is a basic CAN setup for the DA37 and a document explaining how to interface the Motec with our displays. This latter document is advice only and is not maintained by GEMS but it does explain how to interrogate the ECU and get the information that you will need to display the info from the ECU. If you use the Support|Contact Us facility off our website, stating the serial number of the DA37 that you have, I should be able to offer more assistance.

Do you have the MDE37 editing software for this display...?

Best regards,
RickS

pagh106 · Post by **pagh106** » Tue Oct 16, 2012 1:56 pm

Hi,

Now, the dash run ok, but, how I can convert jpg format to bin logo.

Regards,
Patrick

RickS · Post by **RickS** » Tue Oct 16, 2012 3:55 pm

Hi Patrick,
There are a few applications that allow you to create a BIN file but we at GEMS like this one, so I've sent you a PM with an attachment of some software called Image Tosser. It allows you to Opens BMP (not a JPG), adjust it and Export it as a BIN file. Just remember that the Logo can only be a maximum of 2k....!

Best regards,
RickS

DA37 - MOTEC M800

Re: DA37 - MOTEC M800

Re: DA37 - MOTEC M800

Re: DA37 - MOTEC M800