Search found 20 matches
- Wed Feb 17, 2010 9:23 pm
- Forum: Technical Support
- Topic: ALS and modifications needed
- Replies: 3
- Views: 9915
Re: ALS and modifications needed
Not the EGR, that should be exhaust gas valve between the exhaust manifold and intake pipes. I mean, the gas valve, which is between the intake pipe and intake manifold, operated by gas pedal. Throttle plate is the correct term for that? Read somewhere that "throttle kicker" is used, which should le...
- Tue Feb 16, 2010 8:11 pm
- Forum: Technical Support
- Topic: ALS and modifications needed
- Replies: 3
- Views: 9915
ALS and modifications needed
Hello,
Gems v2.28 on Mitsu Lancer Evo 5. If ALS will be mapped, is there a need to make modifications for the gas valve for ALS to work properly? Under what PIN the ALS switch should be?
Best regards,
Rain
Gems v2.28 on Mitsu Lancer Evo 5. If ALS will be mapped, is there a need to make modifications for the gas valve for ALS to work properly? Under what PIN the ALS switch should be?
Best regards,
Rain
- Wed Jun 03, 2009 7:48 pm
- Forum: Technical Support
- Topic: Subaru 2002 base maps
- Replies: 17
- Views: 31135
Subaru 2002 base maps
Hello,
Are the base maps for Subaru 2002 for MAF or MAP use?
Or can be used with both ones?
Regards,
Rain
Are the base maps for Subaru 2002 for MAF or MAP use?
Or can be used with both ones?
Regards,
Rain
- Wed Jun 03, 2009 7:44 pm
- Forum: Technical Support
- Topic: Logging Lancer Evo ecu v2.28
- Replies: 1
- Views: 6457
Logging Lancer Evo ecu v2.28
Hello,
We have one Mitsu Lancer Evo 6 ecu v.2.28. The calibration is password protected.
Is there a way to log the ecu?
By OBDII if not with Gems wire?
Best regards,
Rain
We have one Mitsu Lancer Evo 6 ecu v.2.28. The calibration is password protected.
Is there a way to log the ecu?
By OBDII if not with Gems wire?
Best regards,
Rain
- Thu Apr 09, 2009 9:04 pm
- Forum: Technical Support
- Topic: Lancer V2.28
- Replies: 16
- Views: 31178
Re: Lancer V2.28
Here is my map, can you check the the settings for boost?
Regards,
Rain
Regards,
Rain
- Thu Apr 09, 2009 7:59 pm
- Forum: Technical Support
- Topic: Lancer V2.28
- Replies: 16
- Views: 31178
Re: Lancer V2.28
Hi, I am using MAF. So I can not use bar or any other units. But I still do not get the whole deal with so many maps. I understand that Wastegate map , shows how is the wastegate opened and when. Boost limit table shows the limit of boost in LOAD and if that is passed, then the WG option is used to ...
- Mon Apr 06, 2009 8:01 am
- Forum: Technical Support
- Topic: Lancer V2.28
- Replies: 16
- Views: 31178
Re: Lancer V2.28
Hi, Thanks for the info!
A few more questions.
What could be the aproximate LOAD for 1.5 bar of boost?
Is the parameter to check WG MSR?
Regards,
Rain
A few more questions.
What could be the aproximate LOAD for 1.5 bar of boost?
Is the parameter to check WG MSR?
Regards,
Rain
- Thu Apr 02, 2009 10:27 pm
- Forum: Technical Support
- Topic: Lancer V2.28
- Replies: 16
- Views: 31178
Re: Lancer V2.28
Hello again,
What does this Boost limit table exactly shows? It shows LOAD at RPM, but how does it affect boost?
How does boost Target map affects boost? It is LOAD at rpm per throttle position?
Regards,
Rain
What does this Boost limit table exactly shows? It shows LOAD at RPM, but how does it affect boost?
How does boost Target map affects boost? It is LOAD at rpm per throttle position?
Regards,
Rain
- Tue Jan 20, 2009 6:46 pm
- Forum: Technical Support
- Topic: Lancer V2.28
- Replies: 16
- Views: 31178
Re: Lancer V2.28
Hello, Manual says about Accel Trip, but is that different from 2.27 and 2.28? Also what kind of fuel AFR I should aim before boost and what on boost? On the idle it is the best to see 14.7, but what when I press the throttle and have no boost, what kind of AFR it should be? In what units the Boost ...
- Sun Jan 11, 2009 9:36 pm
- Forum: Technical Support
- Topic: Lancer V2.28
- Replies: 16
- Views: 31178
Re: Lancer V2.28
Hi again, A few questions again. At the moment I have an electronic boost controller controlling the boost. But If I want to have the Gems controlling it, what tables/maps should be tuned? Other thing is that at low revs and on load the car does not pull that good and seems to get stuck a little, wo...
- Thu Jan 08, 2009 8:38 pm
- Forum: Technical Information
- Topic: MAP sensor
- Replies: 12
- Views: 31176
MAP sensor
Hello, What benefits does the car has, when mapping the Gems with MAP sensor, rather than with MAF? Other than you can remove the MAF and have more room under the bonnet? Also , what kind of MAP sensor does the car needs? Does it have to be Gems special MAP? How much does the MAP sensor costs, when ...
- Tue Dec 09, 2008 5:02 pm
- Forum: Technical Support
- Topic: Lancer V2.28
- Replies: 16
- Views: 31178
Re: Lancer V2.28
Hello, I did some tests with this Knock raw PK. I tested it first at full power and it still showed PK value of 99, then I reduced ignition and added some fuel quite much and it still showed the same PK value. It even showed 116 once. Is it possible, that it is hearing some other noise, not related ...
- Fri Nov 28, 2008 10:55 pm
- Forum: Technical Support
- Topic: Lancer V2.28
- Replies: 16
- Views: 31178
Re: Lancer V2.28
As I understood, then knock raw PK is the peak value of knock raw. When I logged the knock raw peak and knock raw parameters, then knock raw shows maximum 51 but Knock raw PK is showing 102. How can that be possible and which value should I look and is there some considerable knocking going on then,...
- Tue Nov 25, 2008 7:00 pm
- Forum: Technical Support
- Topic: Lancer V2.28
- Replies: 16
- Views: 31178
Lancer V2.28
Hi again, Does this version support launch control and how can it be adjusted? About knock noise table. Should I drive around without boost, just to see what kind of noise it makes and log that. And according to that then fill up the noise table? What is the most common noise table for knock? Thank ...
- Wed Nov 19, 2008 9:50 pm
- Forum: Technical Support
- Topic: Lancer Evo 6 idle
- Replies: 6
- Views: 13452
Re: Lancer Evo 6 idle
Thanks. It was much better now!
Just in case 2 logging sessions also. Maeby you can see, if something needs to be finetuned.
Had to change the extensions of the files from stf -> cal , since forum did not let me upload these otherway.
Best regards,
Rain
Just in case 2 logging sessions also. Maeby you can see, if something needs to be finetuned.
Had to change the extensions of the files from stf -> cal , since forum did not let me upload these otherway.
Best regards,
Rain