Search found 8 matches
- Mon Nov 02, 2015 3:50 pm
- Forum: Technical Support
- Topic: Throttle Mod Table
- Replies: 1
- Views: 9694
Throttle Mod Table
Hi, I have an EM20 with GO.26 software and was wondering how the throttle mod table is used. I have not found anything in the documentation that refers to it. The table has a vertical axis of percent. Is this additional fuel at particular throttle opening or is this scaling the throttle to the ign/f...
- Thu Apr 02, 2009 10:43 am
- Forum: Technical Support
- Topic: GWv4
- Replies: 3
- Views: 9672
GWv4
I have just started to use GWv4. When I am viewing the 3d fuel map , can you tell me how to rotate and tilt the image to view from different perspective. Using GW3 I select rotate and use the mouse.
regards
Peter
regards
Peter
- Mon Feb 23, 2009 10:32 am
- Forum: Technical Support
- Topic: Ignition Coil
- Replies: 2
- Views: 8405
Re: Ignition Coil
Would you anticipate any issue in terms of the GEMS ECU driving an MSD 8253 coil. The resistance and current draw look demanding.
I planned to leave the Coil Factor set to 14.
Primary resistanace 0.16ohms
Inductance 3.5mH
Peak Current 450 mA
Spark duratuion 450 uS
I planned to leave the Coil Factor set to 14.
Primary resistanace 0.16ohms
Inductance 3.5mH
Peak Current 450 mA
Spark duratuion 450 uS
- Mon Feb 16, 2009 12:00 pm
- Forum: Technical Support
- Topic: Ignition Coil
- Replies: 2
- Views: 8405
Ignition Coil
Hi, I have a K implant and am running G0.26, using a distributor and single coil. I want to replace the coil with a sport coil and wanted to know whether I should be looking for a low impedance (0.5ohm) or high impedance (3ohm) coil? For use up to 8500 RPM, I assume coil charge time is very limited ...
- Mon Jun 09, 2008 2:52 pm
- Forum: Technical Support
- Topic: Base Map Requests Here!
- Replies: 18
- Views: 52617
Re: Base Map Requests Here!
EM20 RoverK G0.26
Rover K Series 1800 VHPD (Lotus Motorsport 190)
Titan/Lotus 45mm Throttle bodies
Single Coil and Distributor
Lotus Elise
Raceline Exhaust
3 bar fuel pressure
Cams timed at 106/109
Rover K Series 1800 VHPD (Lotus Motorsport 190)
Titan/Lotus 45mm Throttle bodies
Single Coil and Distributor
Lotus Elise
Raceline Exhaust
3 bar fuel pressure
Cams timed at 106/109
- Tue May 29, 2007 4:01 pm
- Forum: Technical Information
- Topic: K Implant DFCO parameters
- Replies: 5
- Views: 16831
- Fri May 25, 2007 2:49 pm
- Forum: Technical Information
- Topic: K Implant DFCO parameters
- Replies: 5
- Views: 16831
- Wed May 23, 2007 11:24 pm
- Forum: Technical Information
- Topic: K Implant DFCO parameters
- Replies: 5
- Views: 16831
K Implant DFCO parameters
I have a K Implant with GO.26 which is running an 1800 K on Throttle bodies using TPS and not MAP. I have DFCO enabled the car has a tendancy to abruptly kick and and pickup when going from deceleration to a small throttle opening, this typically occurs when in slow moving traffic. Can anyone advise...